e69b7b631932e511d24aeb8b42cc546
微信图片_20230224180541
4
2

DT-FTB-HW-01-16

DT-FTB-HW-01-8
DT-FTB-HW-03-10

Description:

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

Features:

  1. Total enclosed structure.
  2. Material:PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to
  3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution…etc all in
  4. Cable, pigtails, and patch cords are running through their own paths without disturbing each other, micro type PLC splitter installation, easy
  5. Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and
  6. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor
Category:

Description

Specification:

  1. Environmental requirement Working temperature: -40℃~+85℃ Relative humidity: ≤85% (+30℃)

Atmospheric pressure: 70KPa~ 106Kpa

  1. Main technical datasheet Insertion loss: ≤0. 15dB UPC return loss: ≥50dB APC return loss: ≥60dB
  2. Thunder-proof technical datasheet

The insulation resistance between the grounding device and the metal parts of the box is no less than 2×104 MΩ/500V(DC); IR≥2×104MΩ/500V.

The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V

 

Configuration table

 

Model

 Size(Pic1)mm A*B*C Max Capacity Installation Size(Pic 2) Input cable diameter(mm) Branch hole cable diameter(mm) Waterproof Adapter
16 core 319.3*214*133 48 52*166*166 ᴓ8~ 14 ᴓ16 16